Part Numbers

Ken(Ark) · Mar 12, 2015

Autozone / 1942 Ford 1/2 ton pick up 2.0L 1B L-head 4cyl

Dist cap F910
Coil - C802
Carb to Intake gasket 8783
Felpro fullset FS7277B
Felpro head 7277B
Intake / Exhaust MS8782B
Points F88
Rotor F909
Condenser F589
Could not find carb kit

O'Reillys
1942 Ford 1/2 ton truck - motor " type 2n"
Carb kit / basic / 778-505a
Had tune up parts and gaskets

Bruce (VA) · Mar 12, 2015

Tnx Ken. I'll add these to my "master parts list"!
75 Tips

Hobo,NC · Mar 12, 2015

https://www.youtube.com/watch?v=oLgcUGmtmgA&feature=youtu.be

Fel-Pro head gaskets are also designed so that no additional sealers are needed. Modern facing materials and their pre-applied coatings, along with the proprietary coatings found on PermaTorque® MLS head gaskets, will compensate for minor surface imperfections, resist scrubbing, and provide the proper amount of torque retention to create a true no-retorque head gasket. Use no sealers, adhesives or other additives with these gaskets

http://www.felpro-only.com/clean-dry/

Ken(Ark) · Mar 12, 2015

(quoted from post at 20:00:54 03/12/15)
https://www.youtube.com/watch?v=oLgcUGmtmgA&feature=youtu.be

Fel-Pro head gaskets are also designed so that no additional sealers are needed. Modern facing materials and their pre-applied coatings, along with the proprietary coatings found on PermaTorque® MLS head gaskets, will compensate for minor surface imperfections, resist scrubbing, and provide the proper amount of torque retention to create a true no-retorque head gasket. Use no sealers, adhesives or other additives with these gaskets
http://www.felpro-only.com/clean-dry/

WOW , I am a Believer ! I guess I don't need that spray paint and shake & bake bags anymore .

Part Numbers

Ken(Ark)

Well-known Member

Bruce (VA)

Well-known Member

Hobo,NC

Well-known Member

Ken(Ark)

Well-known Member

Similar threads