Need help bad, 52 8N 12V

Is there anyone liveing near LaGrange/Hogansville
Ga that can help me, I hired a guy to overhaul my
8N with me telling him what to do, I dont know
what went wrong but when we cranked it up it ran
about 3 seconds and a screeching sound and it
seemed to lock up, got it started the saecond time
and same thing happened again, i cant do much
since i,m in wheel chair and hopring that someone
in the area can come help me. Do it here or take
it home with you, Notlooking for free work, You
will be paid, i just need help. Many thanks for
reading. James
 
James, May I suggest to check that the the governer bolts may have been swapped. The longer of the two is tighten against the cam gear. First thing that came to my mind when I read your post.
Good luck Jack
 
Jack, thanks for the reply, We didnt pull the engin we replaced pistons,rings and sleeves. my sin had alreasy repaced main and rod barring, machin shop did the vales and oil pump,I ordered wrong size sleevs so i he put old ones back in, I dsided to do it right this time so it would last another 50 years, the 8N was my dads or i would not spend the money on it that i have, had it for 43 years. James
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top