dakota7557
Member
Hi, I've been watching this forum for a number of months now trying to absorb everything I can. I purchased a rebuilt 1952 8N 6 (Volt) over the summer. Everything ran fine until the first snow fall...I currently have it in the garage with a blade on it and chains but it's only a paperweight at this time. Here's my problem. There is no spark when I turn it over. It turns over fine but there is absolutely no spark to the plugs or points...I took a plug out and grounded it to the engine and nothing...I have replace the points, plugs, coil and now the ignition switch...
Still no spark...Is there something I'm missing here?? I do have a resistor coming in the mail but living in Custer SD, everything takes time...When I bought it the guy put a new wiring harness on it and like I stated, it ran great until the first snow fall...It's been sitting in the garage since...I have looked at the schematics for the 6 volt and it certainly isn't that complicated, but I'm looking for someone who is obviously brighter than myself...Thanks for any information you can provide...Jody
Still no spark...Is there something I'm missing here?? I do have a resistor coming in the mail but living in Custer SD, everything takes time...When I bought it the guy put a new wiring harness on it and like I stated, it ran great until the first snow fall...It's been sitting in the garage since...I have looked at the schematics for the 6 volt and it certainly isn't that complicated, but I'm looking for someone who is obviously brighter than myself...Thanks for any information you can provide...Jody