2N Loader

Freddiejb · Nov 9, 2014

Trying to mount a WM3, it came off an 8N. We had to order pump shaft and pulley, the kit didn't come with bolts to mount the shaft receiver to the pulley, and we have no way of connecting the shaft to the pump, also is there somewhere we can get a bracket for the loader to mount to the front of the tractor?

TheOldHokie · Nov 9, 2014

(quoted from post at 22:02:36 11/09/14) Trying to mount a WM3, it came off an 8N. We had to order pump shaft and pulley, the kit didn't come with bolts to mount the shaft receiver to the pulley, and we have no way of connecting the shaft to the pump, also is there somewhere we can get a bracket for the loader to mount to the front of the tractor?

The hub bolts to the pulley with four 1/4-28 x 1" hex bolts.

You need to purchase a flexible coupler for the pump end. You can get it here. [u:05927e9060]Morflex Coupler[/u:05927e9060]

I make and sell the front hangers. Call or email for details.

TOH

[email protected]
301.655.0631

2N Loader

Freddiejb

New User

TheOldHokie

Well-known Member

Similar threads