Front tie rod/draglink dust boot size?

52fordredbelly · Oct 19, 2014

Hello everyone thanks for the information in my post below. As a follow-up I am going to have to order in the drag link dust cover from our site but looking at the front tie rods, or looks like they are also referred to as a front drag link they are in good shape with the original "FORD" stamped into them so I'd like to keep them. I am looking to see if anyone knows the size of the dust boot cover so I can just replace the boot as the link is in good shape. Also if someone knows a part number for an Autozone, Advanced Auto or Napa I have those close by as well so I can just get them replaced quickly. I have the misc. boots listed for the tie rods but they are far to large. Thanks

souNdguy · Oct 20, 2014

the front boots are easy. they are just rubber. the rear boots are a lil harder and are metal / rubber.

many auto stores have a small parts 'help' section with a dust boot assortment, usualy 6 boots 2 of each size.

i've always found a set of those that fits fine.

Front tie rod/draglink dust boot size?

52fordredbelly

Member

souNdguy

Well-known Member

Similar threads