9n trans, rearend, 8n motor frontend

tonyoconnor

New User
will a 9n transmission and rearend bolt up to an
8n motor and frontend,, have both,, good 8n motor,
good 9n trans, and rearend?
 
Yes, they can be combined. There are a few differences.
Little things come to mind like the throttle linkage.
If it is a side mount distributor 8N, the generator would be
on the opposite side so a little rewiring. The governor etc.
If you are changing the whole front end, the radius rods are different.
Shouldn't be too much trouble if you have both whole tractors.
Welcome to the forum!
 
I have bought several 9N's with 8N engines I'm sure others on this site have done the same,other than some small differences they will work fine.
 
all the N engines will bolt to all the N bellhousings.

the owner will have to figure out things like throttle linkages and governors mind you.. etc.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top