Greenfield NH Harness and Drawbar club

flembo

Well-known Member
I brought Mr. Edd (48 8n) to the show yesterday with a Ferguson Tractor Jack. The Tractor Jack turned out to be a big hit no body had ever seen one only a few people had heard of them. people were taking pictures of the jack all day. The Greenfield Harness and Drawbar club is a small club and this yr. there were only about 20 tractors a vintage shingle mill a steam engine with boiler and a few hit or miss engines. There was a tractor parade and tractor games and good food. The weather was damp and cold and several other events in the area I believe accounted for the small turnout other yrs. have had much better turnout. Sorry I didn't get any other pictures.
a168820.jpg

a168821.jpg
 

Very nice tractor. Looks like its on display perched up there.

That lift always made me wonder. Everything Ford built seemed to be made very heavy duty yet that lift used smaller gauge tubes than what I would think would be safe. Hell but I guess I'm not Ford.
I have seen that lift only once in the past and it was used on hard ground. Glad to see that it works on the softer lawn also.
 
I must have lifted and lowered that tractor 25 or 30 times yesterday and the last time I noticed the rear tires were dragging on the ground I could see the jack was pressed into the soft ground.
 
Thanks for the compliment on the tractor pictures always seem to look a little better LOL. The jack is a ferguson made for 9n and 2n I had to bend the yokes out a little to work with a 8n.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top