(800) 853-2651
SHOP NOW

carb ID help please

D

dogsled1

Member
I have a '52 8N in need of a carb rebuild. They sell two kits here on YT for the 8N one for the TSX33 and one for TSX241A, TSX241B, & TSX241C.

I am not sure which one I need. :?: Hopefully somebody can tell me how to figure it out. Both sides of my carb have Marvel-Schebler stamped on the flange where it bolts to the intake manifold. It has 10A and 355 stamped in the bottom of the bowl, a 6 stamped near the air intake, what looks to be a big C stamped on one side.
 
Do not know where you are but if you have a O'Reilly's auto parts store in your area they have a Walker brand kit that works well for around $20. Part # 778-505a
 
(quoted from post at 21:35:23 07/24/14) Do you have a brass plate on it?
Click to expand...

No, I found an ID post on another site, I still am not sure, the also mention the plate. Some places (TSC for instance) sell a kit with the same part number as one of the YT kits and says it fits any/all of the 8N carbs.
 
(quoted from post at 20:49:52 07/24/14) Do not know where you are but if you have a O'Reilly's auto parts store in your area they have a Walker brand kit that works well for around $20. Part # 778-505a
Click to expand...

Thanks, good to know. There is an O'Reilly's near by actually.
 
You must log in or register to reply here.

Similar threads

R
15 Cent Carburetor
Replies
16
Views
1K
RandyC
R
8
PLEASE HELP 49 8N Ford
Replies
18
Views
1K
Jerry9N
J
L
Can someone help me ID this Motor
Replies
5
Views
634
sandcastle1
S
V
new owner of a 620, will try to update this as we go.
2 3 4
Replies
61
Views
3K
valiant8086
V
J
Allis WD Won't Run
Replies
11
Views
1K
jdschwass
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top