Bridge rectifier ( diode)

I want to put together a diode to replace the cut out on a friends 2N but I can't find my notes from when I did mine. What amp., volt sizes will work. I have found some anywhere from 25 amp, 100v to 50 amp 1000V. Thanks again guys for all the help you have given me over the years.
 
After burning up numerous cutouts by forgetting to disconnect the battery or thumping the cutout to make sure the points were open I opted to go with the rectifier. It has been years since I did this and have never had a dead battery since I replaced the cutout.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top