Apologies - this is possibly the wrong list - but, it is pulled behind a 52 8N, 6v, side mount & I read this list daily - so does that count?
I've a Land Pride AT2572 finish mower. I hit an obstruction and the center blade has stripped the threads inside its spindle - I removed the blade hub (under the deck) expecting to then simply lift the drive pulley & shaft out of the hub and its two bearings. But it won't move. I've tried some vertical assistance w/ hammer etc... nada.
Now contemplating physical assault on the lower bearing (heck - its the only available target!). I'm probably missing something obvious. How do I replace the spindle?
Basically trying to replace part #47 on page 28 of www.landpride.com/ari/attach/lp/public/manuals/310-002p.pdf
Help? Advice? (or - redirection?)
On a more on topic question - can anyone recommend an 8N shop in the Kansas City MO area? I've had my 8N for some 25 years and while she only mows or brush hogs for some 30 hours a year . . . and I do have some mechanical smarts.. and fixed bits & pieces & oils & filters etc over the years . . . I know that she's approaching an age that deserves some more professional TLC.
Many thanks - Angus
I've a Land Pride AT2572 finish mower. I hit an obstruction and the center blade has stripped the threads inside its spindle - I removed the blade hub (under the deck) expecting to then simply lift the drive pulley & shaft out of the hub and its two bearings. But it won't move. I've tried some vertical assistance w/ hammer etc... nada.
Now contemplating physical assault on the lower bearing (heck - its the only available target!). I'm probably missing something obvious. How do I replace the spindle?
Basically trying to replace part #47 on page 28 of www.landpride.com/ari/attach/lp/public/manuals/310-002p.pdf
Help? Advice? (or - redirection?)
On a more on topic question - can anyone recommend an 8N shop in the Kansas City MO area? I've had my 8N for some 25 years and while she only mows or brush hogs for some 30 hours a year . . . and I do have some mechanical smarts.. and fixed bits & pieces & oils & filters etc over the years . . . I know that she's approaching an age that deserves some more professional TLC.
Many thanks - Angus