Just installed a new wire harness in my 1949 Toro general. It is powered with a 9n motor. I also replaced the
-resistor
-cut out
-coil
-6 volt generator
-points
-plugs
-ammeter
upon start up switch on and head lites on ammeter shows -12 amps. Adjusted the screw on the back of the genny and at driving speed ammeter increased to +2. I am going on a tractor ride next week(65 miles per day) where should this amp gauge read when running 8 hours per day?
-resistor
-cut out
-coil
-6 volt generator
-points
-plugs
-ammeter
upon start up switch on and head lites on ammeter shows -12 amps. Adjusted the screw on the back of the genny and at driving speed ammeter increased to +2. I am going on a tractor ride next week(65 miles per day) where should this amp gauge read when running 8 hours per day?