JohnE/Pa

New User
I sure could use a little help,I need to replace a belt on my woods mower it is a RM 59 Woods 3PTH mower,could any one show me a belt diagram how to install this belt,would any help on this.
 
There should be a diagram on the under side of the shield.If not goggle your mower.One should show up.Good Luck..
 
There are several variations of the RM-59.
This is the belt routing for the RM-59-3.
Hopefully this is the one you have.

17519.jpg
 
Thanks carintexas I got the picture , looks very similiar to what I have now if I can just enlarge the picture it mmay get me going.appreciate the help
 
(quoted from post at 23:14:05 05/11/13) John. You can download the manual for your Woods mower directly from Woods for free.

Rick
I thought that too Rick, but when I went to their site I couldn't
find anything on an RM-59.
Seemed odd considering how many of them are around!
Did I just miss it?
 
I don't know if any of you Pa boys are close the NJ and need parts but I've got a woods RM on my trailer headed to the scrap yard. Has spindles/blades. I believe it's a six footer. Don't know if parts a interchangable. Your more than welcome to strip off some parts for free or take the whole thing (for scrap price)
No, I'm not willing to strip it and send the parts.
My email is open.

Kirk
 
Thanks so much, it looks a lot like my mower,will check it out later today, and thanks everyone for your input,dont know what I would do with out you guys,Im quite a ways from Jersey but appreciate the offer.
 
I have a woods R59 finish mower that I had to replace the belt mine had a diagram under the front when the sheilds are off I have a book on the mower if you need I can email the diagram to you
Bud from mich.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top