Britcheflee
Well-known Member
I am going to replace the accelerator pump on my 1953 Mercury - has to the two barrel carb - have had problems with the pump before but this year it needs to be replaced - this is the one with the leather top - I have the new part but my question is - do I need to soak that leather in anything before installing or install just as is?
I hope I made myself clear this is the small plunger with the leather cap which squirts a little gas into the carb when you 'blip' the throttle.
Thank you
Lee
I hope I made myself clear this is the small plunger with the leather cap which squirts a little gas into the carb when you 'blip' the throttle.
Thank you
Lee