(800) 853-2651
SHOP NOW

Dearborn 10-80 disc/CNH part 103144 discontinued

W

William Fissell

Member
Hi, All,

did a search on the web and on YT. My discs are beat up but OK. CNH part 103144 has not been superseded, but abandoned- the local dealer tells me NOPE all gone and done no more.

Osmundson was somewhat tersely unhelpful when I enquired: No, and No.

Tufline has 26" discs, but they are bored for a square hole in the middle, like a harrow, not with a 5 bolts in a circle.

Any other ideas for replacement sources? I can't imagine theres a CNH dealer sitting on a pile of NOS somewhere. There's tons of chinese and indian dealers on the web 'minimum order 500' and none of them have the bolt circle.

thanks in advance.

Bill
 
(quoted from post at 12:55:29 03/11/13) Hi, All,

did a search on the web and on YT. My discs are beat up but OK. CNH part has not been superseded, but abandoned- the local dealer tells me NOPE all gone and done no more.

Osmundson was somewhat tersely unhelpful when I enquired: No, and No.

Tufline has 26" discs, but they are bored for a square hole in the middle, like a harrow, not with a 5 bolts in a circle.

Any other ideas for replacement sources? I can't imagine theres a CNH dealer sitting on a pile of NOS somewhere. There's tons of chinese and indian dealers on the web 'minimum order 500' and none of them have the bolt circle.

thanks in advance.

Bill
Click to expand...

Fabricate some sort of an adapter for mounting a newer disc?

TOH
 
Sparex sells replacement discs for the Ferguson and Massey Disk plows. Try Sparex part number S.57412. Hope that helps
 
try this link

http://v2.gb.sparex.com/ItemDetails/ItemDetails.aspx?ItemNumber=57412&CurrentTab=ManufacturerPartNumbers
 
William Fissell ,Look at Wear Parts LLc,They have 24",28",30"32",36"smooth 5 hole blades.Go down to the bottom of the page and click on baker plow blades.call 1-888-425-2337
Blades,
 
Thanks, talked to them already this am; they were pretty certain that those would not work for me, but didn;t say why. Also, even though it says 'smooth' on the web site, they said they are notched.

They did suggest they could take a random 26" disc and knock 5 holes in it for me, but I'd have to address the remaining hole in the center which would get clogged up.
 
You must log in or register to reply here.

Similar threads

T
PARTS RFQ: Needed for Dearborn Disc Harrow
Replies
1
Views
834
Leroy
L
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top