Carb shack shipping 3 more saved TSXs.. today

GB in MT.

Well-known Member
[b:9146cb5f8b][i:9146cb5f8b] All blasted, painted, wired out,tested, and boxed up for shipping this morning.
Been a slight delay in getting these three done, as the weather here has been crappy, with humidity High!!!
One more waiting to be blasted,....and two soaking in the carb cleaner bucket, PLUS two more coming in sometime this week!
completedamptestedreadyforshipping.jpg

Going out to start the heater in the shack, and get ready to 'Hit it again'!!!

Have an 'N' day!!!

Gary :)
montana1.gif
[/i:9146cb5f8b][/b:9146cb5f8b]
 
Truly amazing craftmanship! Sometimes I wish my 8N would start stumbling and need a rebuild; just to get your quality work. But it's been starting and running great without any of those adjustment jets even being touched for at least 15 years. Points were replaced years ago, and then last year with EI, and plugs about every five years, but that carb just keeps carb'in along.
 
(quoted from post at 10:55:45 03/06/13) Truly amazing craftmanship! Sometimes I wish my 8N would start stumbling and need a rebuild; just to get your quality work. But it's been starting and running great without any of those adjustment jets even being touched for at least 15 years. Points were replaced years ago, and then last year with EI, and plugs about every five years, but that carb just keeps carb'in along.
b:6ef306f6b7][i:6ef306f6b7]
Jim;
Thanks for the nice words....BUT.....IF, yer carb is still 'carb'in' after all this time,....leave it alone, and don't even look at it!!!! :lol:
'PURDY', won't make it run good, and fixen' something that ain't broke....might just be broke when ya get done fixen' it!!!!!! :lol: :roll:

Gary :!: [/i:6ef306f6b7][/b:6ef306f6b7]
 
[/quote]i:f6cf17ca9a]
'PURDY', won't make it run good, and fixen' something that ain't broke....might just be broke when ya get done fixen' it!!!!!! [/i:f6cf17ca9a][/b:f6cf17ca9a][/quote]

OK, OK, Gary, I hear ya! :oops:

I'll just leave it alone...
 
Hope your sending that 'display cone' it's sitting in, along with it too. Hate to see it fall over and ding the little womans coffee table.. PB
 
(quoted from post at 17:42:36 03/06/13) HAH! 71 year old overachiever
b:40c322c4a8][i:40c322c4a8]

.................................MacNaughtons!!!!!!!!!!................

Gary 8) [/i:40c322c4a8][/b:40c322c4a8]
 
That's like my old '52-----it runs perfect as far as carb. operation and it has never been rebuilt. No reason to rip in to anything at this point. Beautiful work sir, you are a true skilled craftsman.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top