8N oil pump bushing tool kit

Dave in De · Feb 20, 2013

just got the oil pump tool kit I ordered so I can rebuild my oil pump. shouldn't the ream fit through the alignment jig? and where can I find instuctions for this kit? only thing in the kit was 2 drivers a ream and jig w/screws, NO instuctions.

JMOR · Feb 20, 2013

Go to a long post by DAN, at this link & see if it helps clarify for you.
http://www.ytmag.com/cgi-bin/viewit.cgi?bd=nboard&th=692156

gatchelguy · Feb 21, 2013

One of those 'drivers', the longer one I think is a lineup pilot. Drive the old bush out with the short one, install the fixture on the body loosely, stick the pilot thru the fixture and body, tighten bolts, pilot should turn freely, install new bush from the outside with the driver, remove driver, stick the reamer in the fixture and attack the bush. Cutting oil is your friend.

8N oil pump bushing tool kit

Dave in De

Member

JMOR

Well-known Member

gatchelguy

Member

Similar threads