I have an 8N where the hydraulic lift control bushings are worn badly. (Like about 1/8 wobble) I have always avoided replacing them because they were never this bad and it looks like a real dog fight get the bushing out and replace. I have slugged the lift arms a couple of times with a hammer and they didn’t show any sign of movement.
Any suggestion or procedures on how to replace the rock shaft bearings? Should I just live with it? Does the lift work better when the bushings are changed?
I have oxy-acetylene for heat, a very good 20 ton hydraulic press, and a sledge hammer.
Any suggestion or procedures on how to replace the rock shaft bearings? Should I just live with it? Does the lift work better when the bushings are changed?
I have oxy-acetylene for heat, a very good 20 ton hydraulic press, and a sledge hammer.