| Ford 9N, 2N & 8N Discussion Forum |
Topic: Re: ID this 8N carb please
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| old
02-17-2013 14:21:06
209.86.226.11
|
Picture big enough?? To me if it is cast iron it is a M/S if aluminum it is a M/S wannabe but likely the M/S kit will work
|
|
[Reply] [No Email] | |
| FLAcharlie
02-17-2013 14:45:12
151.213.167.50
|
|
Re: ID this 8N carb please in reply to old, 02-17-2013 14:21:06
|
| Definitely not aluminum, very heavy.
|
[Reply] [No Email] | |
| GB in MT.
02-17-2013 15:18:30
216.47.48.80
|
|
Re: ID this 8N carb please in reply to FLAcharlie, 02-17-2013 14:45:12
|
|
Charlie;
If you go to YT parts, and look under carbs, you will see a carb there that has a part# of (wm-8N9510C) !! Listed for $133.??
That is what you have there!!
Takes a standard TSX33 carb kit, and is an 'AFTERMARKET' carb, NOT a Zenith, nor a Marvel Schebler!!! Manufacterer UNKNOWN!!
Think those are a 'pot metal' casting, and yes the early ones are/were, of a heavy nature.
Not too bad a carb, for an aftermarket. Smooth passages and easy to overhaul/clean up!!!!! I have done a couple, of those, with good results!!
BTDT!!!
HTH
Gary :wink:
This post was edited by GB in MT. at 15:21:34 02/17/13.
|
[Reply] [No Email] | |
| FLAcharlie
02-17-2013 15:50:01
151.213.167.50
|
|
Re: ID this 8N carb please in reply to GB in MT., 02-17-2013 15:18:30
|
| | cool, thanks Gary. If I recall, I got that used from Wenger's, and it was on the air for about 5 years, very happy with it, got it for a good price.
|
[Reply] [No Email] | |
| GB in MT.
02-17-2013 15:58:06
216.47.48.80
|
|
Re: ID this 8N carb please in reply to FLAcharlie, 02-17-2013 15:50:01
|
| Quoting Removed, click Modern View to see
If it will make ya feel better.......that particular carb, is the ONLY 'aftermarket' carb, that I will even concider, for overhaul.
My FIL, has one on his 8N, and loves it!!!
Gary 8)
|
[Reply] [No Email] | |
| FLAcharlie
02-17-2013 14:23:38
151.213.167.50
|
|
Re: ID this 8N carb please in reply to old, 02-17-2013 14:21:06
|
| Sorry, these new-fangled phones are overly aggressive on the pixel side, for sure.
|
[Reply] [No Email] | |
[Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
