|Trevinoedw_@hotmail.com said: (quoted from post at 16:44:57 01/28/13) |
Can anyone please tell me of an easy way to test
the starter switch on my 8N ? The tractor starts
right up when I short the solenoid with a wire!
The wire from the switch should have continuity to ground with the button pushed. Solenoids go bad more often than the switch. You could ground a wire and touch it to the pin that the wire from the button connects to. That would tell if it's the switch or solenoid. This post was edited by billy boy2 at 05:50:50 01/28/13.