Author	[Modern View]
Wes(MI) 01-27-2013 02:13:53 68.188.166.225 Report to Moderator	Royse & everyone else, I'm not agreeing or disagreeing on the suitability of these tractors for various tasks. I've just never seen a collective discussion/opinions as to why & what the flaws are for the axle. It's better than getting not suitable, or to weak without much of an explanation as to why. There's a vast amount of knowledge/experience here, on this board. I'm an inquisitive person that likes to know the reason behind things. And sometimes my curiosity gets the better of me. So, thank you everyone for your knowledge, I do greatly appreciate it. [Reply]   [No Email]
Bulldozer 01-27-2013 06:45:31 24.165.92.6 Report to Moderator	Re: why is the axle weak? in reply to Wes(MI), 01-27-2013 02:13:53   Please read my previous post on the front axle strength. The numbers will show that the front axle is not safe for extra vertical loads from add on implements applied at the center axle pin hole for load over 400#. That is the basic reason. Imagine the result ,if the front axle fractured from lifting a load of gravel with the bucket in the fully raised position. In my opinion the front axle is not inherently weak for the original purpose of the tractor. [Reply]  [No Email]