|
| |
| Ford 9N, 2N & 8N Discussion Forum |
Topic: Re: 8n - front mount dist - plug 1 & 2 fouling
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| Dell (WA)
11-30-2012 01:18:50
63.226.222.68
|
Wade........its NOT yer squarecan coil its yer carbon core (glass) sparkie wires. They BREAK inside the insulation from handling. Gitt some real COPPER CORE sparkie wires (cut to fit) You do know ittza 2-bolt, 15-min job to replace the points (0.015") on the kitchen table, don't you? Just un-snapple yer capple and letter dangle. Remove yer 2-bolts and take a walk to the kitchen. Installation is a reversal of the removal ...except... finger start the 2-bolts and put the rotor on. Now rotate the rotor so the OFF-SET tang fits the OFF-SET camshaft slot. Now tighten the 2-bolts and re-snapple yer capple. Simple, eh? Because yer weird 4-nipple frontmount dizzy has an OFF-SET drive scheme, you can NOT install it outta time. Remember to "polish" the INVISIBLE corrosion from between the points (0.015") after installation. Me? I clamp a clean $1-bill between the points and pull. Iff'n yer really cheap, tear a strip from HEAVY brown grocery sack and use that. .........Dell, yer self-appointed sparkie-meister
|
|
[Reply] [No Email] | |
| Ramen
11-30-2012 03:59:49
24.59.99.190
|
|
Re: 8n - front mount dist - plug 1 & 2 fouling in reply to Dell (WA), 11-30-2012 01:18:50
|
| I'm sorry, What is a "ittza", Is that a Brand name?
Confused
|
[Reply] [No Email] | |
| Dell (WA)
11-30-2012 12:46:45
63.226.222.68
|
|
Re: 8n - front mount dist - plug 1 & 2 fouling in reply to Ramen, 11-30-2012 03:59:49
|
| Ramen........what do YOU think ittza means? I use it to convey information, and it called "writing style"........Dell, with 4-degrees
|
[Reply] [No Email] | |
| heybusdriver
11-30-2012 19:47:52
70.71.96.170
|
|
Re: 8n - front mount dist - plug 1 & 2 fouling in reply to Dell (WA), 11-30-2012 12:46:45
|
| | Dell , you make me laugh, question " is that 4* top dead center" ?
Stan
9N 222933
2N with 8N motor 8N345567
8N 146710
8N 179555
8N 197904
8N 199000
8N 254079
8N 362039
|
[Reply] [No Email] | |
| W_B
11-30-2012 06:26:55
155.188.247.25
|
|
Re: 8n - front mount dist - plug 1 & 2 fouling in reply to Ramen, 11-30-2012 03:59:49
|
| ittza = it's a = it is a
|
[Reply] [No Email] | |
[Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
