|
| |
| Ford 9N, 2N & 8N Discussion Forum |
Topic: Re: fuel problem
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| old
11-29-2012 07:42:52
209.86.226.19
|
Brake line works just fine and will cost you less then half the price of a factory type line your call. I always use brake line any more and if to long I just put a loop in it so as to dampen vibration
|
|
|
| pconnie
11-29-2012 15:13:28
67.72.98.45
|
|
Re: fuel problem in reply to old, 11-29-2012 07:42:52
|
|
| does it take a special flare for the fittings
|
|
|
| old
11-29-2012 18:33:11
209.86.226.34
|
|
Re: fuel problem in reply to pconnie, 11-29-2012 15:13:28
|
|
| That is why brake line works so well it is pre flared to the correct size plus it is a double flare so holds up better
|
|
|
| soundguy
11-29-2012 14:30:00
107.41.147.152
|
|
Re: fuel problem in reply to old, 11-29-2012 07:42:52
|
|
| i usually make my own too.. but for a guy needing a one time use .. e probably don't have a bending tool.. and i figured the board could use the business.. :)
|
|
|
| old
11-29-2012 18:34:38
209.86.226.34
|
|
Re: fuel problem in reply to soundguy, 11-29-2012 14:30:00
|
|
| Bending tool??? I have never used one yet when working with brake line but yes some people can mess up a cannon ball in a swimming pool
|
|
|
| soundguy
11-30-2012 11:35:29
184.4.146.28
|
|
Re: fuel problem in reply to old, 11-29-2012 18:34:38
|
|
| i figure if he is not stopping to read the description.. then free bending may be totally out of the question.. :)
|
|
|
| old
11-30-2012 11:51:19
209.86.226.57
|
|
Re: fuel problem in reply to soundguy, 11-30-2012 11:35:29
|
|
| Yep last time I bent a circular bend in one I used a carb cleaner can as the form and worked just fine
|
|
|
| Ken(Ark)
11-30-2012 12:28:30
173.187.227.94
|
|
Re: fuel problem in reply to old, 11-30-2012 11:51:19
|
|
| Quoting Removed, click Modern View to see
A power steering pump or alternator pulley makes a good shade tree bending tool .
To the original post , remove the drain plug (1/8" pipe thread ) and replace with a $3 drain cock . If a constant stream of fuel will not flow into a coffee can then you can check one part at a time until you eliminate the problem .
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
