I was pulling my starter off of my 1950 8N (6V
w/side mount dist) and before I could get a nut
screwed on the end of one of the long starter bolts
it slipped out of my hands and the starter came
apart about 1 inch or so. The ends of the long bolts
are just flush with the end of starter. Any tricks
to getting it back together?
w/side mount dist) and before I could get a nut
screwed on the end of one of the long starter bolts
it slipped out of my hands and the starter came
apart about 1 inch or so. The ends of the long bolts
are just flush with the end of starter. Any tricks
to getting it back together?