clean dirty hyd hoses that are brand new

Anonymous-0

Well-known Member
i just start work on davis loader.. found out the part available.. for that loader.. the center loader ram has to be custom build. on that loader. so I have have build.. they just got done repair pump and controller.. all three cylinder are being repair too but now all my new hoses and pipe tube are contimater.. so i need to clean them out question how with what and how..
 
ya talkin' about INSIDE or OUTSIDE??? Removed or installed??? Kerosine or diesel would be my choices. ........Dell
 
(quoted from post at 12:52:37 11/10/12) i just start work on davis loader.. found out the part available.. for that loader.. the center loader ram has to be custom build. on that loader. so I have have build.. they just got done repair pump and controller.. all three cylinder are being repair too but now all my new hoses and pipe tube are contimater.. so i need to clean them out question how with what and how..

Flush with diesel (aka kerosene) and blow then out with compresse air.

TOH
 
these few word should explain it ? Hydraulic oil is contamination..new pipe and hoses...
just got done clean the hoses.. took a lot sponge and made round plug and put on a 36 inch wood 3/8 dia stick and clean all the crap out lot of rubber and dirt from the hose,steel pipe.. thank for information ...
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top