TheOldHokie
Well-known Member
- Location
- Myersville, MD
I have obtained several of the 9N/2N under axle swinging drawbar adapters I posted about several months ago and they are now available for purchase on my website. They may be ordered with a drawbar clevis permanently welded to the adapter ready to go (as pictured). You will need to purchase the aftermarket swinging drawbar (C0NN805F) and hanger (NCA809A) to make a complete swinging drawbar setup just like the one used on the 8N/NAA.
The adapter may also be ordered without the welded clevis if you want to use the bolt holes for mounting the aftermarket clevis (NCA-803B) that comes with the full 8N drawbar kit.
Comes primed ready to paint to match your tractor and includes all hardware neecded to bolt it on.
TOH
PS> The square head differential drain plug gets replaced with a socket head version which can be accesed through the pin hole in the clevis using an Allen head socket or key.
The adapter may also be ordered without the welded clevis if you want to use the bolt holes for mounting the aftermarket clevis (NCA-803B) that comes with the full 8N drawbar kit.
Comes primed ready to paint to match your tractor and includes all hardware neecded to bolt it on.
TOH
PS> The square head differential drain plug gets replaced with a socket head version which can be accesed through the pin hole in the clevis using an Allen head socket or key.