Mr. T. Minnesota
Member
Forum Members,
Have posted messages in the past few days concerning a 241B carb for an 8N. I may have to reset the float level because I am getting a slight seepage of fuel from the gasket area on the carb when the engine is not running. This happened once before on my 2N and I reset the float with a slightly more than 1/4 inch spacing. It worked.
My question is: should something else be done to remedy this problem? The gasket is in good condition. Any thoughts are welcome.
Mr. T. Minnesota
Have posted messages in the past few days concerning a 241B carb for an 8N. I may have to reset the float level because I am getting a slight seepage of fuel from the gasket area on the carb when the engine is not running. This happened once before on my 2N and I reset the float with a slightly more than 1/4 inch spacing. It worked.
My question is: should something else be done to remedy this problem? The gasket is in good condition. Any thoughts are welcome.
Mr. T. Minnesota