headlight wire

MnNC

Member
i may have ask this before but cant remember.

can i wire the headlights to the switch post ? the post that has juice
after key is turned on. i took it off there i think, but, again, can not remember....yep, memory issues here :) will take picture next time i start
taking wires off.

thank you.....
 
i'm not real sure what I just read there.

however.. i'll say this.

pickup power for the headlamp switch from the same feeder spot you are getting it for the ignition switch.

do not run if off the switched side of the ignition, nor off the incoming contact of the ignition switch.. but rather back at the point the ignition switch also gets it's power from.
 
thanks soundguy
apologies for the less than clear question

so connect the headlight power wire before the ignition switch
which, if i'm correct, will be on the resistor ?
my 2n is 12v

thanks in advance....
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top