Tractor Jacks

I have a rear jack that lifts the back of the tractor with the 3 point hitch. I saw a video of a tractor also lifting the front-end at the same time. Looks like it lifts on the front of the motor. Does anybody know if that was available with the rear-end jack or did someone just make it?

[b:e13305bdd4][i:e13305bdd4]
Dave;
In short.....YES....the front part of that lift, orig. came with the back part, that you already have, and is/was attached to the back part with a chain to enable you to lift the whole tractor, all at once.....front and back.

If you would like the measurements for that lift set-up.....I have them on file!!!

Just email me for the info., and I will send it to you via email.!!! Hoping you are not on dial-up....about 5-6 pages of info., & orig. instructions!!!

My email is always open....on the mod. side of the forum, at the bottom of this reply!!!

Gary
My lift in use!!! for painting
[/i:e13305bdd4][/b:e13305bdd4]

It was a seperate component of the jack assy along with a connecting chain. Since they were seperate and hardly used they were easily misplaced. The front jack had a peg on top that stuck into a hole in the bottom of the front axel support.

Thanks a lot! [email protected]

To GB in MT u offered 2 send email of instuctions for tractor jack to dave.Would u be willing 2 email diagrams 2 me? It would greatly b appreciate it. I have a 46 2n Thanks Mike

(quoted from post at 15:58:51 10/09/12) To GB in MT u offered 2 send email of instuctions for tractor jack to dave.Would u be willing 2 email diagrams 2 me? It would greatly b appreciate it. I have a 46 2n Thanks Mike

Click to expand...

b:6b7c0baa69][i:6b7c0baa69]
S.....O.....;
Sure.... not a problem.
I need yer email addy to do that tho. My email is always open, at the bottom of my posts/replies, on the modern side of this forum. Shoot me a quick email and I will return/email ya the diagrams.

Gary :wink: [/i:6b7c0baa69][/b:6b7c0baa69]

(quoted from post at 17:02:35 10/09/12)

(quoted from post at 15:58:51 10/09/12) To GB in MT u offered 2 send email of instuctions for tractor jack to dave.Would u be willing 2 email diagrams 2 me? It would greatly b appreciate it. I have a 46 2n Thanks Mike

Click to expand...

b:73a519a123][i:73a519a123]
S.....O.....;
Sure.... not a problem.
I need yer email addy to do that tho. My email is always open, at the bottom of my posts/replies, on the modern side of this forum. Shoot me a quick email and I will return/email ya the diagrams.

Gary :wink: [/i:73a519a123][/b:73a519a123]

Click to expand...

GB,
Would you add me to that list also? Sorry, but I don't see your email addy.

(quoted from post at 08:48:19 10/10/12)

(quoted from post at 17:02:35 10/09/12)

(quoted from post at 15:58:51 10/09/12) To GB in MT u offered 2 send email of instuctions for tractor jack to dave.Would u be willing 2 email diagrams 2 me? It would greatly b appreciate it. I have a 46 2n Thanks Mike

Click to expand...

b:f40bc7acc5][i:f40bc7acc5]
S.....O.....;
Sure.... not a problem.
I need yer email addy to do that tho. My email is always open, at the bottom of my posts/replies, on the modern side of this forum. Shoot me a quick email and I will return/email ya the diagrams.

Gary :wink: [/i:f40bc7acc5][/b:f40bc7acc5]

Click to expand...

GB,
Would you add me to that list also? Sorry, but I don't see your email addy.

Click to expand...

b:f40bc7acc5][i:f40bc7acc5]
Dennis;
Got your email, and the info. you want, is on it's way to you, as of about 30mins. ago!!!!!!!!

Having 2 sides to this forum....is NOT a good thing!!!!! :lol:

Gary :roll: [/i:f40bc7acc5][/b:f40bc7acc5]