|
| |
| Ford 9N, 2N & 8N Discussion Forum |
Topic: 12 V coil front mount dist.
[Return to Forum]
| Author |
[Modern View]
|
| Mi-Bill
08-18-2012 08:26:25
70.194.0.179
|
upgrading to 12V on my 1948 8N.. I would like to find the conversion piece that enables use of round coil. My 640 runs better after changing to 12 v coil (recommended on this site) that does not require an external resistor.
|
|
[Reply] [No Email] | |
| JMOR
08-18-2012 09:18:32
72.181.173.171
|
|
Re: 12 V coil front mount dist. in reply to d beatty, 08-18-2012 08:26:25
|
| Quoting Removed, click Modern View to seeThe Pertronix plate costs $100 when bought separate from the EI unit & still won't solve the problem for the fellow who wants to keep points, because it does not leave room for the condenser. You could move condenser outside. Attached are a few solutions & many exist, including Soundguy's carved wooden block.
line is below guts:
Just let you imagination run wild.
and one more nice on that Bob did. It requires condenser to be mounted outside distributor like the Pertronix adapter would.
http://ytforums.ytmag.com/viewtopic.php?t=737609&sid=70bd7a5135dd70a8927f1694664fe4e7
|
[Reply] [No Email] | |
| JMOR
08-18-2012 10:16:46
72.181.173.171
|
|
Re: 12 V coil front mount dist. (where condenser?) in reply to JMOR, 08-18-2012 09:18:32
|
|
Where did condenser go?
Installed, complete.
|
[Reply] [No Email] | |
| soundguy
08-18-2012 09:58:28
173.103.166.76
|
|
Re: 12 V coil front mount dist. in reply to JMOR, 08-18-2012 09:18:32
|
| | yep.. plenty of ways to skin that cat. I have since polyereothaned my wood block.. betweent hat and the epoxy i used.. she makes a good water proof non conductive block. I'm gonna mock one up out of resin using a form/cast later this summer.. see how it turns out..
|
[Reply] [No Email] | |
| soundguy
08-18-2012 08:36:25
173.105.0.246
|
|
Re: 12 V coil front mount dist. in reply to Mi-Bill, 08-18-2012 08:26:25
|
| | i've seen the pertronix kit that offers the front mount blank off to use a round coil.. you you can make your own with a blank block or gutted front coil. no magic.. just a couple wire connections... and depending on how you go about it.. MAYBEE a change to the dizzy cap..
|
[Reply] [No Email] | |
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
