Author	[Modern View]
mikem501 06-19-2012 19:54:23 75.73.32.209 Report to Moderator	I have a Ford I9-97 loader on my Jubilee, and I can't seem to find any books on the loader. My question is, do any of you guys have any experience rebuilding the hydraulic pistons. Mine leaks fluid where the piston slides in and out. It's a dual action piston, with pressure up and pressure down. Is it just a matter of replacing seals ? Any help appreciated. [Reply]   [No Email]
TheOldHokie 06-21-2012 05:10:07 71.176.137.144 Report to Moderator	Re: Jubilee Loader in reply to soundguy, 06-19-2012 19:54:23   Quoting Removed, click Modern View to see You did fine - that is a reasonable price. TOH   [Reply]  [No Email]
Mikem501 06-21-2012 04:45:35 156.99.75.2 Report to Moderator	Re: Jubilee Loader in reply to mikem501, 06-19-2012 19:54:23   Thanks for all the replies. I bought this at auction a couple years ago. It has the "golden jubilee" logo in the hood, and a 4 speed tranny. I confess, I don't know a lot about these and the serial number is very hard to read. Do you think I got hoodwinked ? Paid $2100.   [Reply]  [No Email]
Royse 06-20-2012 14:37:44 69.36.49.151 Report to Moderator	Re: Jubilee Loader in reply to mgriff543, 06-19-2012 19:54:23   Hook and proofmeter (I think I see) look like NAA.   [Reply]  [No Email]
awhtx 06-20-2012 07:56:43 96.226.59.78 Report to Moderator	Re: Jubilee Loader in reply to mikem501, 06-19-2012 19:54:23   First time I've seen 9N/2N front hubs on an NAA.   [Reply]  [No Email]
old 06-20-2012 08:43:58 209.86.226.40 Report to Moderator	Re: Jubilee Loader in reply to awhtx, 06-20-2012 07:56:43   I did not notice that but your right. Wonder if it is in fact a 9N or 2N or an early 8N instead of a Jubilee/NAA   [Reply]  [No Email]
soundguy 06-20-2012 05:10:13 173.107.208.18 Report to Moderator	Re: Jubilee Loader in reply to mikem501, 06-19-2012 19:54:23   i agree with TOH.. I've had plenty of old loader cyls repacked while I waited at my local mom n pops hyd shop. they found standarv chevron and PU packing on the shelf that they made fit with -0- issues. soundguy   [Reply]  [No Email]
TheOldHokie 06-20-2012 02:51:32 71.176.135.177 Report to Moderator	Re: Jubilee Loader in reply to Richard G., 06-19-2012 19:54:23   mikem501 said: (quoted from post at 22:54:23 06/19/12) I have a Ford I9-97 loader on my Jubilee, and I can't seem to find any books on the loader. My question is, do any of you guys have any experience rebuilding the hydraulic pistons. Mine leaks fluid where the piston slides in and out. It's a dual action piston, with pressure up and pressure down. Is it just a matter of replacing seals ? Any help appreciated. The 19-97 manual is available for free download on the N tractor Club site: http://www.n*tractor*club.com/manuals/implements/loaders/Dearborn%2019-97%20&%2019-105%20Industrial%20Loaders%20-%20AO.pdf References to that site are blocked so I munged the URL to get past the filter. Remove the two *'s from the URL to get it to work Packing for the cylinders should be standard stackable vee packing and easily replaced. Need to know the OD, ID, and height of the stack: Vee Packing TOH This post was edited by TheOldHokie at 03:11:26 06/20/12.   [Reply]  [No Email]
dlplost 06-20-2012 01:15:38 74.69.150.99 Report to Moderator	Re: Jubilee Loader in reply to mikem501, 06-19-2012 19:54:23   Cylinder Services in Rochester NY Cylinder Services   [Reply]  [No Email]
old 06-19-2012 21:00:05 209.86.226.32 Report to Moderator	Re: Jubilee Loader in reply to mikem501, 06-19-2012 19:54:23   A lot of times it is cheaper to take them to a hyds shop to have rebuilt due to the fact it can be hard to find the correct packing's for them and a good hyds shop will be able to measure and all so as to get the correct size parts. Plus if they need other work they have the equipment and know how and if they mess up its on them   [Reply]  [No Email]