(800) 853-2651
SHOP NOW

Some interesting foot boards

R

Royse

Well-known Member
Saw [b:8523f28764]this[/b:8523f28764] on CL, not mine, not affiliated.
I'm guessing those are shop built?
Looks like the right brake pedal may lack clearance.
 
I'm guessing those are shop built?
Click to expand...

Lawson, they look similar to these:

mvphoto21130.jpg
 
As Bill said steelcraft running boards and like all of the few I have seen the wheel guards were removed.
 
Yep, Bill & Kirk got it nailed down. The SteelCraft Co. supplied a cab for the 9N tractor early on and you needed to use those special running boards in order to assemble the entire unit to the tractor. I've seen many N's with these on, some with the cab, some without. I have a complete unit including the running boards,in perfect condition, no rust, no dents, no cracks, no welds. I had it blasted and painted years ago just never installed it on my early 9N.

[i:654c4848f0][b:654c4848f0]<font size="4">Tim *PloughNman* Daley(MI)</font>[/b:654c4848f0][/i:654c4848f0]<table width="100" border="1" cellpadding="0" cellspacing="0" bordercolor="#000000"><tr><td height="25" colspan="2" bgcolor="#CC0000">
<font color="#FFFFFF" size="3">*9N653I* & *8NI55I3*</font>​
</td></tr><tr><td>
4lBA6Yh.jpg
</td><td>
zzYVuC4.jpg
</td></tr></table>
 
Here are some pix of my restored SteelCraft Cab, freshly blasted and painted. An observant eye will note I have the rear frame brace upside down. I was just posing them for pictures. The special running boards are still in the paint booth. All offers considered?email open.

STEELCRAFT CAB FOR FORD 9N TRACTOR:
9NCAB001.jpg
9NCAB001.jpg
,img src="http://i15.photobucket.com/albums/a379/ploughNman/9NCAB002.jpg">​
9NCAB003.jpg
9NCAB004.jpg

Tim *PloughNman* Daley(MI)
 
One final note on the SteelCraft Running Boards. The cab was first offered for the 9N, which had no running boards you already know. That's why they supplied the special ones as shown. When the 8N Model came out with OEM running boards, the cab was still offered as an optional accessory, only now did not require the SC running boards as the stock 8N ones would work. I've seen ads and actual 8Ns with the OEM running boards and the cab attached. I have assembly/instruction sheets on fastening the cab to both the 9N and the 8N.

TPD
 
You must log in or register to reply here.

Similar threads

super 55
550 at Auction
Replies
6
Views
426
Centerplate
C
C
MF202 brake problem
Replies
11
Views
433
Caryc
C
J Hamilton
Some sawmill work today
Replies
9
Views
324
Den N Ms
D
R
NAA w/o lift?
2
Replies
21
Views
1K
JMOR
J
P
275 rear axle leak
Replies
1
Views
272
hearnc843
H
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top