Robert (AL)
Member
I just rebuilt the top part of my 9n hydraulic system. I didn't plan on removing the pump, but I put a new control valve in, and it seemed to be binding. So I dropped it,
cleaned it good and inspected all the parts. My problem is now, getting it back in the tractor. The (new) relief valve is hanging up and I can't get the bolts to line
up. I would appreciate any advice on re-installing this pump.
cleaned it good and inspected all the parts. My problem is now, getting it back in the tractor. The (new) relief valve is hanging up and I can't get the bolts to line
up. I would appreciate any advice on re-installing this pump.