skyline loader

I purchased a Ferguson TO20 with a SkyLine model 90 loader. The loader is missing the lift rams. Anybody know what the specs are?
 
(quoted from post at 13:27:20 03/05/18) I purchased a Ferguson TO20 with a SkyLine model 90 loader. The loader is missing the lift rams. Anybody know what the specs are?

I do not know what the "specs" are but it's pretty easy to figure out. Correct me if I am wrong but I believe the model 90 had single acting displacement cylinders similar to the Model 99 so I'd use that as a starting point:
  • [*:254e14b7dc]Cylinder 1-7/8[*:254e14b7dc]Rod diameter: 1-7/8.[*:254e14b7dc]Stroke 31"[/list:eek::254e14b7dc]The Model 101 had double acting cylinders:
    • [*:254e14b7dc]Cylinder diamter 2-1/4"[*:254e14b7dc]Rod Diamter: 1-3/4[*:254e14b7dc]Stroke: 31"[/list:eek::254e14b7dc]

      Working off that a pretty close approximation in a modern cylinder would be something like this:

      Wolverine DA cylinder

      Before buying anything you need to determine the retracted length and end connections needed. Some fabrication may be necessary.

      TOH
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top