Fresh rebuild on Jubilee, gets a little hot when bush hogging. Had radiator checked and serviced while out of the tractor. Don't have a radiator shroud yet (dude at the salvage yard is "out of town" and can't ship til Friday, accepts paypal but doesn't know how to invoice someone, etc, etc.).
Belt is tight, new water pump. 180 degree thermostat. Block hot tanked by machine shop for rebuild. After about 20 minutes of bush hogging temperature gauge runs up to just under the red zone.
Anyone know what the temperature range on the Jubilee is supposed to be and how I would check and verify the gauge? Probably going to pull the radiator back out and have it sent to the radiator shop once again.
TIA.
Belt is tight, new water pump. 180 degree thermostat. Block hot tanked by machine shop for rebuild. After about 20 minutes of bush hogging temperature gauge runs up to just under the red zone.
Anyone know what the temperature range on the Jubilee is supposed to be and how I would check and verify the gauge? Probably going to pull the radiator back out and have it sent to the radiator shop once again.
TIA.