SLWagner73
Member
So, my arms won't lift, and after pulling the inspection cover, I'm lost.
There is oil seeping out of the front of the ram on top, and the oil is gurgling around inside of the pump.
So, I looked at the pictures and read the chapter in the FO-4 manual, and I'm still lost.
Would I be further ahead just rebuilding the whole unit, or am I just overlooking something.
This is a 1944 2n, and the hydraulics worked fine until this spring.
I don't know if these will show up.
There is oil seeping out of the front of the ram on top, and the oil is gurgling around inside of the pump.
So, I looked at the pictures and read the chapter in the FO-4 manual, and I'm still lost.
Would I be further ahead just rebuilding the whole unit, or am I just overlooking something.
This is a 1944 2n, and the hydraulics worked fine until this spring.
I don't know if these will show up.