hydraulic cylinder

hdltch · Apr 18, 2017

My old cylinder # 9n-510A and the new one # is cyl 6005 and it is bigger than the old one and is hitting somewhere under top cover so what is the difference in these two cylinder and will it need to be moderified in order to work in my 8n tractor.

JMOR · Apr 18, 2017

Put paint on it, try to install to see where contacting

Den N Ms · Apr 18, 2017

Hdltch,Yep,some of the Chiner replacement hydraulic cyiliders are thicker in some areas and need to be ground off some for clearance.Like JMOR, said Put paint on it, try to install to see where contacting,or use some model clay to see where it is contacting.

hdltch · Apr 18, 2017

Thank You Sir I will give that a try.

hdltch · Apr 18, 2017

Thanks I will give it a try.

TheOldHokie · Apr 20, 2017

(quoted from post at 09:14:51 04/18/17) My old cylinder # 9n-510A and the new one # is cyl 6005 and it is bigger than the old one and is hitting somewhere under top cover so what is the difference in these two cylinder and will it need to be moderified in order to work in my 8n tractor.

I understand the 9N-510A number. The other number is meaningless to me - where did it come from? A picture of the new one or even better both side by side would help greatly.

TOH

hydraulic cylinder

hdltch

Member

JMOR

Well-known Member

Den N Ms

Well-known Member

hdltch

Member

hdltch

Member

TheOldHokie

Well-known Member

Similar threads