2N Starter switch pivot piece.

MN_2N

Member
Hi All,

I'm working on restoring the original functionality of the starter switch for my 2N and I need to obtain this pivot piece and pin (see attached). Evidently a previous owner removed it. On a side note, this previous owner mounted a solenoid and simple push button. Do any of you know where this piece can be purchased? I didn't find it in the store on this site and didn't have much luck when googling for it.

Thanks!
47382.jpg
 
Part number 9N11515 will likely only be found at a tractor salvage yard or someone on the board that might have one available.
 
What JMORE says or find someone parting one out on ebay. Sadly there is one being parted out almost weekly.
 
I do not know if the 8N uses the same tractor part number or not, others can chime in. I saw on the Ferguson tractor Facebook site that David
Shea of Vermont tractor parts had the next tractor in line for dismantling was a 8N, dated March 27th. He may also have that in the parts
warehouse, might want to look him up.
 
There is a guy over on the other old ford tractor site parting out a 8N. Thread over their listed as Sad News. Looks like he might be willing to sell the part.
 

There is a name for that little devil but I can not remember it..
A good one is hard to come by the last one I had I sold to a guy that use to post here his handle was Jeb,2N....
 
(quoted from post at 20:18:51 04/02/17)
There is a name for that little devil but I can not remember it..
A good one is hard to come by the last one I had I sold to a guy that use to post here his handle was Jeb,2N....

My book says it isa lever, of all things.
 

Thanks everyone for your feedback.

ArleninOr, I'm going to contact you via email/safemail.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top