I have a 6 cylinder I am trying to get going. Engine will
run for 10 or so seconds and then quit. Acts like
something is binding in front , by cam/water pump.
Occasional smoke/steam out front breather. After that bit
of running , valves will be way out of adjustment.
Stumped. Cam is on gear fine, key in place. Any
suggestions on what may be causing this? Thank you
run for 10 or so seconds and then quit. Acts like
something is binding in front , by cam/water pump.
Occasional smoke/steam out front breather. After that bit
of running , valves will be way out of adjustment.
Stumped. Cam is on gear fine, key in place. Any
suggestions on what may be causing this? Thank you