Moline diesel heads and injectors

J.A.R

Member
I bought a 68' m670 diesel a few months back as a project. Long story short got it running and found it ran like crap. Figured I'd send the injectors off but after discovering cracks in the injector bores I removed the heads. After they were off I found out that it had been overhauled but the heads were defiantly not original to the tractor. So this is the question, I cannot find any info on what heads go with what injectors. The casting on my heads are 10A23134 and the injectors are Bosch KB95SA485/13. Iv been told from Welters that you had to have the right copper gasket but no info was gave to me about what thickness it needs to be or any real info. If anyone can help I'd will be greatly appreciated since these heads cost a fortune. Thanks in advance.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top