(800) 853-2651
SHOP NOW

got the moline 2/16 af trip plow home

C

carvel minne farmer

Well-known Member
went to devon alta. today and picked up a Moline af 2/16 trip plow today for the m5 to play with! needs a bit of tlc straighten some bent levers and iron, clean up and reweld gob welding that was done. there is a black stencil on top of the frame that says Moline af I'm hoping some experienced members here can confirm it is. the paint looks like prairie gold on the 3 wheel assemblys and I believe the frame was red?? does any one know what years these plows were made?the fellow I bought it from is a die hard allis chalmers man who wanted it gone, didn't fit in with all the orange paint there!! bill has 16 a.c. tractors from d 17's down to u's, hand cranked the u 1st flip of the crank it was purring. I think he has just about every implement a.c. made. bill is 78 years old and in great shape and it was a lot of fun today as bill gave me the tour of his lifetime of collecting a.c. equipment. some pics of the plow. john
2216.jpg
2217.jpg
2218.jpg
2219.jpg
2220.jpg
2221.jpg
 
I agree with John, its a model AF. It has the later style hitch on it. Mine was
a 1945 model. I updated mine to rubber tires and hydraulic lift for my ZA.
a169479.jpg
 
alan could you send me pics of how you did the hydraulic lift conversion, and where would I go to get the rubber wheels to change out the steel wheels. the wheel hubs look the same for steel and rubber? thanks alan
 
I found a junk plow that had a bent beam lol. It was hydraulic and had rubber
tires so I just swapped them with mine. I will see if I have any pictures. The
3rd bottom bolts outside of the rear coulter just behind the land wheel. Most
plows of that time of other brands did the same thing. You need the 3rd bottom
assembly and the I beam that mounts on top. When you add it you remove your
rear wheel and bolt it to the back of the add on beam.
 
thanks alan that makes sense, i'll try and do the same. just hope I can get there before the scrappers! are the hubs for the steel and older type spoke like yours the same? switch out with out any mods? thanks john
 
You must log in or register to reply here.

Similar threads

L
Proper color for a 2 bottom Eagle hitch plow
Replies
14
Views
792
Case Nutty 1660
C
A
I got the new to us White 598 plow in the field today.
Replies
15
Views
522
Tubacase47
T
C
moline af 2/16 plow hookup
Replies
10
Views
2K
carvel minne farmer
C
C
minneapolis moline D-400 4/16 plow questions
Replies
3
Views
860
carvel minne farmer
C
F
Case three bottom trip plow. Paint and value ?
Replies
7
Views
2K
Ronin.80
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top