Just picked this up_335 I think

Got this baby for free and have no idea about it. SN plate is missing and the previous owner had a huge ram resting on the back. Curious to what I could hook up behind it implement wise. Please help me out with any and all information you wish to share.

My pictures are of such a high quality I can not post them here. Please follow my link to where they are posted full-size and high definition.

https://imgur.com/gallery/hzfbQ

-Thanks
 
The tractor had a backhoe on it at one time. The ram and rr rail are just counter weight now. I have a 445 with a cement weight.
 
Looks like a 335 Industrial. Would have heavy I beam front axle. Hard to see in picture.
Serial tag on transmission housing to verify.
 
Looks like they used the backhoe frame to bolt on a chunk of railroad iron and wired the large hyd cyl for counter weight.
As far as what you could pull with it. There is a hitch welded on the back, and every thing looks strong enough to pull anything that tractor could handle. You could pull anything you want to except any three point equipment and if you wanted to pull an implement that required a remote cylinder you would have to plumb a valve into the hydraulics with hoses and quick couplers out the back.
MMDEL
 
My 335 Ind. has cast rear wheel centers that are held onto the hubs with 12 wheel bolts on each wheel. All of the 335 Ag tractors that I have seen or owned used 6 bolts. My 335 Ind.has the heavy cast frt. axle with cast wheel centers and demountable rims. clint
 
I agree that is a lot of "free" Very nice. Interesting fenders. They look like
Case fenders mounted to fit? Dont quite look like R fenders but they were the
only smaller fenders with those style ribs in them.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top