This message is a reply to an archived post by fdt860 on May 11, 2016 at 05:42:08.
The original subject was "GVI with inline pump using Case parts?".
i have installed a bosch a-pump off of a case tractor, cant remember the model though, on a 504 in a g-1000. not a terrible install. had to custom bend some new injector lines. that with a turbocharger made roughly 200hp. the big change came by way of a p-pump off of a mack truck. dyno maxes out at 300hp, which didnt even lug the tractor down. estimated power is around 350.
The original subject was "GVI with inline pump using Case parts?".
i have installed a bosch a-pump off of a case tractor, cant remember the model though, on a 504 in a g-1000. not a terrible install. had to custom bend some new injector lines. that with a turbocharger made roughly 200hp. the big change came by way of a p-pump off of a mack truck. dyno maxes out at 300hp, which didnt even lug the tractor down. estimated power is around 350.