Hello guys.
I have a G900 ( with closed center hydraulics ) and the hydraulic system runs very hot. I have rebuilt the pump, draft-3 point valve and replaced the filter. The reservoir and lines get very hot. I was thinking I could plum an oil cooler into the hyd case can line. Would this help me out any?
I have a G900 ( with closed center hydraulics ) and the hydraulic system runs very hot. I have rebuilt the pump, draft-3 point valve and replaced the filter. The reservoir and lines get very hot. I was thinking I could plum an oil cooler into the hyd case can line. Would this help me out any?