I am hoping someone can give me some ideas about how to get my plow to lock in the up position when I pull the rope at the end of a the field. Right now it will turn over but will go on over to the plowing position going the other way. I know very little about it and it has been sitting quite a while. Any help will be appreciated. Thanks in advance.
- Thread starter kermkep
- Start date
Cliff Nelson
Well-known Member
Make sure the latches move without binding AND the springs are good on the latches.
J.Wondergem
Well-known Member
- Location
- Rockford, Mi.
Our local hardware store has a big selection of springs. Just a suggestion.
Which springs are you in need of? The torsion springs by the latches were bad on mine. I made the springs
from round spring stock. Very painful experience when the tail got away from me when I was winding it and
caught me in the ribs. If I remember, the original springs are .135 and I think the spring stock I found is
.155". Worked fine and looks good. Get all you linkages to move easy and if the springs are still good, it
should work. If I can be of any help, let me know.
from round spring stock. Very painful experience when the tail got away from me when I was winding it and
caught me in the ribs. If I remember, the original springs are .135 and I think the spring stock I found is
.155". Worked fine and looks good. Get all you linkages to move easy and if the springs are still good, it
should work. If I can be of any help, let me know.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy