molinegb

Well-known Member
My next project is to rebuild motor in 1960 Big Mo. Runs good but has serious blowby. Need to find good tinwork and set of gauges as well as proper seat. Tin, fenders and are the same as Four Star.
a211863.jpg
 
What do you think of the transmission in that 600? Its some kind of hydro, isn't it?

FYI: I got the seat for my Big MO 400 industrial off of a brown uniharvestor.
 
Big Mo and Motrac have same torque convertor setup. Gear selection as normal but no clutch pedal. Just a foot pedal for forward and reverse. Be tough to get s seat off a Uni as few to none here!
 
Big Mo 600 production numbers lower than Motracs. Around 60 made with 30 made into Brickbuggies. Know of only one other 600.
 
I am betting thats not a 600 unlest some one changed the hood looks like a old 400 yes Iknow a little Ihave a 500
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top