Thomas (AB)

New User
Looking for instructions to time the magneto. I have had the mag rebuilt and bench tested, and i was hoping to get it going for this weekends pull. But my Manual will not be showing up until next week.

Serial number is 323973S
It has a replacement FairBanks-Morse mag,CW X4B9C
Any help would be appreciated. Thanks
 
Find TDC on #1 by removing valve cover and turning over till #1 intake closes. Crank over 1/2 turn until DC 1-4 mark appears on flywheel. Usually the flywhee will have to cleaned to see marks. Mag should trip 1 1/2 inches past DC1-4. Remove mag cap so rotor lines up with #1 when it trips. Usually you will have to lead it on previous #2 so it trips on #1.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top