Who grinds a good puller cam?

Anonymous-0

Well-known Member
Hey guys. I am debating on building myself a puller. Was gonna build a M5 "U". Or a 403 "U". I'm just trying to get some info on who you think grinds a good puller cam. Thanks in advance.
 
My opinion is keep the stock cam and degree it in. I have seen numerous regrinds tried, removed and discarded. If running high rpm, ignore what I said.
 
Berry Cam service in Lester Prairie MN. Tell him what engine you have plus any over bore, compression ratio, the max RPM you plan to run and what RPM you want it to hang at. Price was good.
 
RICKE'S ENGINE AND MACHINE IN ALGONA IOWA 515-295-6142 HAD SEVERAL GROUND THERE, THEY GIVE YOU A PRINTOUT OF THE GRIND SO YOU CAN PROPERLY DEGREE THE CAM WHEN INSTALLING. I RUN LOW RPMS A GOOD POWER CAM GRIND GIVES YOU WAY MORE TORQUE. GOOD LUCK
 
Where are you from, I always have drove by rickies but never did any business there I live nearby algona
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top