Brad Dixon
Member
I have a 61 M5 that I recently acquired and have been servicing, adjusting,etc. The PTO turns even when not engaged. I have other tractors that creep, but this thing turns like it is engaged.I adjusted it per the owner's manual but no difference.(that wasn't easy through that little hole, by the way, but I was able to do it after removing the left fender) Haven't had an implement on it yet to really test it. Does it have plates that might just be stuck from none use? Would those maybe free up if I put a load on the PTO? Any input would be greatly appreciated. It turning all the time is kind of dangerous. thanks.