need help finding a clutch. 1950-1951 rte rti rtu?

engine tag: 0175001902
transmission tag: 00103024
lull shoveloader tag: 4-a / 51-a

wide front axle, non-adjustable
gas engine, foot clutch, hand throttle

got it running, but clutch is shot. i can"t seem to find what clutch i need, so i can find where to get it.

pic of clutch through inspection plate, i hope you guys can lead me somewhere.... thanks.
a131016.jpg

a131017.jpg
 
You have an RTI. The engine is 1950 and the rear end was replaced at some point with one from a 1951 RTU. You should be able to have a clutch shop reline your disc and machine your pressure plate.
 
thanks for the clarification of the model. due to having no shop, and having to work on it in place, i was hoping to split it, swap clutch, and rebolt in a day.

guess i will be making some calls on monday.

is there another clutch/plate combo that is more readily available and or affordable that will fit in its place?

also, anyone interested in a rti with a lull shoveloader? possibly with a new clutch?
 
I think you have a 10 inch clutch. I have an RTI that had the same problem. I got the clutch pads from an Allis Chalmers WD and re-riveted them to my clutch. The 10 inch are somewhat hard to find.
 

after extensive measuring, digging through internet, and looking at google images, i am 95% sure that i have disk # rt9500a. 9", 6 spline.

i have ordered one, and i will post the result when it arrives and i have split the tractor...

any advice on splitting a tractor with a lull loader attached, in the open, with no overhead devices or supports? (i.e. roof, beams, cherry picker, crane...)
 
virgin split attempt in the a.m.

camera memory card currently awol.

crumbling concrete pad parking spot.

and a guitarist as my helper.

clutch disk comes in friday, wish me luck...
 
uneventful split. took my time, took about 2 hours.

got the clutch assembly out, cleaned and measured the disc, only to realize that the clutch due today is different.

all research points to 9" 6 spline, so i ordered one. what came out is 10" 6 spline.

pressure plate is off to be resurfaced today, so i don't even have it on hand to take to local suppliers to try and i.d. a replacement disc/plate....

camera card still missing, no local reliners, and a part number on the disc that goes nowhere.. cl-1191-28
 
for those of you keeping score at home, and anyone else trying to play along:

r, rt, rtu use the 9" clutch -still available. rt9500a
rti industrial uses the 10" clutch -obsolete. 10p56/a5017

today i sent my 10" disc off to be relined, expected back on friday. camera card has been found, pictures pending. my clutch assembly is rti correct, and pressure plate is original.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top