MM Baler Help Needed

Anonymous-0

Well-known Member
I have an old MM twine tie baler fro the 1950's. It is a model 760.
It is missing the knives for the knotters. It seems to be the type that McCormick used in the 50's and does not have the arm that pushes the knot off the bill hook. It simply uses the backward motion and weight of the bale to do that job. ANY information as to where to get knives for this baler would be greatly appreiated!
 
Supposedly those knotters were all replaced by a New Holland knotter by the dealers because they had so many problems with them. Those knotters were later raised up higher so the end of the stems from being cut on top of the bale didn"t interfere with the knot being made. I think I have a whole New Holland knotter assembly that I saved from a baler being junked. I"m pretty sure I don"t have any parts for the international style knotters. If I remember correctly, some of the parts from a 45 Int baler will fit.
John
 
My e-mail is open. Send me a picture of yours (or post it) so I can look to see what all you need to make sure I have it all.
 
I would be interested in the knotters you have. I am not real good at figuring out how to communicate well on the forum so please email me at : [email protected] and we will see what we can come up with.
Thanks
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top